No products in the cart.
Shop
Showing 1387–1407 of 1485 results
- KF Fittings
Tee
These KF Tee fittings follow KF standards. They are commonly used to build foreline vacuum plumbing and process systems. They are often called quick flange fittings because they are quick to assemble. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges. The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. They are made of corrosive-resistant stainless steel.
- APG series
Edwards APGX-H 1/8 NPT (Stainless Steel) Linear Convection Vacuum Gauge, D02396000
Edwards APGX-H 1/8 NPT (Stainless Steel) Linear Convection Vacuum Gauge has a wide measuring range from 1333 to 3 x 10-4 mbar (1000 to 2.3 x 10-4 Torr). The use of APGX-H 1/8 NPT convection technology ensures accuracy and sensitivity are maintained to the top of the range.
The Edwards APGX-H 1/8 NPT is compact and may be mounted in any orientation, simplifying installation where space is limited. The gauge incorporates a setpoint and two LEDs, which indicate setpoint and gauge status.
The Edwards APGX-H-NW25 uses the constant temperature principle in which the cooling effect of the gas on the filament is overcome by varying the voltage applied, which in turn maintains a constant resistance and keeps the circuit in equilibrium. This voltage is therefore a measure of the pressure in the gauge tube. It should be noted that different gasses have different thermal properties and as such the output of Edwards APGX-H-NW16 is gas dependant.
- Vacuum, Solvent Purification
Membrane vacuum pump incl. connection cable 1510807
Suitable for MB-SPS systems.
Not suitable for operation in explosion-proof areas.
It can only be used outside an explosion-proof area (mounted on PLC).Chemical resistant
Final vacuum: 8 mbar absolute
suction capacity: 38 l/min
230V, 50Hz(Original item number: 1501018, 2600899)
- KF Fittings
Unequal Tee
These KF-KF Tee Reducer fittings follow KF standards. They are commonly used to build foreline vacuum plumbing and process systems. They are often called quick flange fittings because they are quick to assemble. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges. The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50. They are made of corrosive-resistant stainless steel.
- KF Fittings
Four Way Cross
These KF 4-way cross vacuum fittings follow KF standards. They are commonly used to build foreline vacuum plumbing and process systems. They are often called quick flange fittings because they are quick to assemble. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges. The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50. They are made of corrosive-resistant stainless steel.
- Feedthrough
IEC connection flexible Power feedthrough 1510441
Single phase feedthrough and power strip supply in your glovebox.
The feedthrough and power strip can be installed without the need for an electrician.You can choose what is connected to the power strip inside and external the glovebox.
The feedthrough can be easily removed for annual insulation testing.
The 3 way power strip is included with the delivery.
- KF Fittings
KF-KF Conical Reducer
These KF-KF conical reducer vacuum fittings follow KF standards. They are commonly used to build foreline vacuum plumbing and process systems. They are often called quick flange fittings because they are quick to assemble. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges. The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50. They are made of corrosive-resistant stainless steel.
- KF Fittings
Tee
These KF Tee fittings follow KF standards. They are commonly used to build foreline vacuum plumbing and process systems. They are often called quick flange fittings because they are quick to assemble. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges. The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. They are made of corrosive-resistant stainless steel.
SKU: EV1011Login to see price! Select options - APG series
Edwards APGX-H 1/8 NPT (Stainless Steel) Linear Convection Vacuum Gauge, D02396000
Edwards APGX-H 1/8 NPT (Stainless Steel) Linear Convection Vacuum Gauge has a wide measuring range from 1333 to 3 x 10-4 mbar (1000 to 2.3 x 10-4 Torr). The use of APGX-H 1/8 NPT convection technology ensures accuracy and sensitivity are maintained to the top of the range.
The Edwards APGX-H 1/8 NPT is compact and may be mounted in any orientation, simplifying installation where space is limited. The gauge incorporates a setpoint and two LEDs, which indicate setpoint and gauge status.
The Edwards APGX-H-NW25 uses the constant temperature principle in which the cooling effect of the gas on the filament is overcome by varying the voltage applied, which in turn maintains a constant resistance and keeps the circuit in equilibrium. This voltage is therefore a measure of the pressure in the gauge tube. It should be noted that different gasses have different thermal properties and as such the output of Edwards APGX-H-NW16 is gas dependant.
SKU: D02396000Login to see price! Add to cart - Vacuum, Solvent Purification
Membrane vacuum pump incl. connection cable 1510807
Suitable for MB-SPS systems.
Not suitable for operation in explosion-proof areas.
It can only be used outside an explosion-proof area (mounted on PLC).Chemical resistant
Final vacuum: 8 mbar absolute
suction capacity: 38 l/min
230V, 50Hz(Original item number: 1501018, 2600899)
SKU: 1510807Login to see price! Add to cart - KF Fittings
Unequal Tee
These KF-KF Tee Reducer fittings follow KF standards. They are commonly used to build foreline vacuum plumbing and process systems. They are often called quick flange fittings because they are quick to assemble. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges. The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50. They are made of corrosive-resistant stainless steel.
SKU: EV1012Login to see price! Select options - KF Fittings
Four Way Cross
These KF 4-way cross vacuum fittings follow KF standards. They are commonly used to build foreline vacuum plumbing and process systems. They are often called quick flange fittings because they are quick to assemble. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges. The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50. They are made of corrosive-resistant stainless steel.
SKU: EV1013Login to see price! Select options - Solvent Purification
Ground-Fitting-Connection NS 14/23
Application:
Adapter for Luer tube system at the tapping pointof the MB-SPS
Technical data:
Material: PTFE
Size: 14…23 mm
Connection: 6 mm outer diameter
Utilities:none
Safety:No measures necessary
Note:Suitable for MB-SPS Compact, MB-SPS-5/7SKU: 1510720Login to see price! Add to cart - Feedthrough
IEC connection flexible Power feedthrough 1510441
Single phase feedthrough and power strip supply in your glovebox.
The feedthrough and power strip can be installed without the need for an electrician.You can choose what is connected to the power strip inside and external the glovebox.
The feedthrough can be easily removed for annual insulation testing.
The 3 way power strip is included with the delivery.
SKU: 1510441Login to see price! Add to cart - Solvent Purification
Ground-Fitting-Connection NS 29/32
Application:
Adapter for Luer tube system at the tapping pointof the MB-SPS
Technical data:
Material: PTFE
Size: 29…32mm
Connection: 6 mm outer diameter
Utilities:none
Safety:No measures necessary
Note:Suitable for MB-SPS Compact, MB-SPS-5/7SKU: 1510721Login to see price! Add to cart - KF Fittings
KF-KF Conical Reducer
These KF-KF conical reducer vacuum fittings follow KF standards. They are commonly used to build foreline vacuum plumbing and process systems. They are often called quick flange fittings because they are quick to assemble. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges. The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50. They are made of corrosive-resistant stainless steel.
SKU: EV1014Login to see price! Select options
- Login to see price! Add to cart
- KF Fittings
Tee
These KF Tee fittings follow KF standards. They are commonly used to build foreline vacuum plumbing and process systems. They are often called quick flange fittings because they are quick to assemble. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges. The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. They are made of corrosive-resistant stainless steel.
Login to see price! Select options - Login to see price! Add to cart
- APG series
Edwards APGX-H 1/8 NPT (Stainless Steel) Linear Convection Vacuum Gauge, D02396000
Edwards APGX-H 1/8 NPT (Stainless Steel) Linear Convection Vacuum Gauge has a wide measuring range from 1333 to 3 x 10-4 mbar (1000 to 2.3 x 10-4 Torr). The use of APGX-H 1/8 NPT convection technology ensures accuracy and sensitivity are maintained to the top of the range.
The Edwards APGX-H 1/8 NPT is compact and may be mounted in any orientation, simplifying installation where space is limited. The gauge incorporates a setpoint and two LEDs, which indicate setpoint and gauge status.
The Edwards APGX-H-NW25 uses the constant temperature principle in which the cooling effect of the gas on the filament is overcome by varying the voltage applied, which in turn maintains a constant resistance and keeps the circuit in equilibrium. This voltage is therefore a measure of the pressure in the gauge tube. It should be noted that different gasses have different thermal properties and as such the output of Edwards APGX-H-NW16 is gas dependant.
Login to see price! Add to cart - Vacuum, Solvent Purification
Membrane vacuum pump incl. connection cable 1510807
Suitable for MB-SPS systems.
Not suitable for operation in explosion-proof areas.
It can only be used outside an explosion-proof area (mounted on PLC).Chemical resistant
Final vacuum: 8 mbar absolute
suction capacity: 38 l/min
230V, 50Hz(Original item number: 1501018, 2600899)
Login to see price! Add to cart - Login to see price! Add to cart
- KF Fittings
Unequal Tee
These KF-KF Tee Reducer fittings follow KF standards. They are commonly used to build foreline vacuum plumbing and process systems. They are often called quick flange fittings because they are quick to assemble. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges. The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50. They are made of corrosive-resistant stainless steel.
Login to see price! Select options - KF Fittings
Four Way Cross
These KF 4-way cross vacuum fittings follow KF standards. They are commonly used to build foreline vacuum plumbing and process systems. They are often called quick flange fittings because they are quick to assemble. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges. The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50. They are made of corrosive-resistant stainless steel.
Login to see price! Select options - Solvent Purification
Ground-Fitting-Connection NS 14/23
Application:
Adapter for Luer tube system at the tapping pointof the MB-SPS
Technical data:
Material: PTFE
Size: 14…23 mm
Connection: 6 mm outer diameter
Utilities:none
Safety:No measures necessary
Note:Suitable for MB-SPS Compact, MB-SPS-5/7Login to see price! Add to cart - Feedthrough
IEC connection flexible Power feedthrough 1510441
Single phase feedthrough and power strip supply in your glovebox.
The feedthrough and power strip can be installed without the need for an electrician.You can choose what is connected to the power strip inside and external the glovebox.
The feedthrough can be easily removed for annual insulation testing.
The 3 way power strip is included with the delivery.
Login to see price! Add to cart - Login to see price! Add to cart
- Solvent Purification
Ground-Fitting-Connection NS 29/32
Application:
Adapter for Luer tube system at the tapping pointof the MB-SPS
Technical data:
Material: PTFE
Size: 29…32mm
Connection: 6 mm outer diameter
Utilities:none
Safety:No measures necessary
Note:Suitable for MB-SPS Compact, MB-SPS-5/7Login to see price! Add to cart - KF Fittings
KF-KF Conical Reducer
These KF-KF conical reducer vacuum fittings follow KF standards. They are commonly used to build foreline vacuum plumbing and process systems. They are often called quick flange fittings because they are quick to assemble. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges. The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50. They are made of corrosive-resistant stainless steel.
Login to see price! Select options