No products in the cart.
E2M 18 and 28 series
Showing all 4 results
E2M 18 and 28 seriesEdwards E2M18 Dual Stage Rotary Vane Pump, Single Phase, 115/200-230 V, 50/60 Hz, A36317984
The Edwards E2M18 Rotary Vane Pump is a vacuum pump that has a pressurized oil system that lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior (suckback) after the pump stops. The pumping chambers are air-tight, so this arrangement prevents oil suckback unless the gas ballast valve is open.
You can inspect the level and condition of oil in the oil box reservoir through the oil sight-glass. An oil filler-plug is fitted to the top of the oil box. The pump has an oil drain-plug to allow either gravity oil drain or pressure oil drain.
The EM Vacuum Pump Series range of oil‑sealed rotary pumps – renowned for their high ultimate vacuum, rapid pumping speed, quiet operation and ability to handle vapour – have become the industry standard for laboratory and light industrial applications. The pump is a freestanding unit with the drive provided through a flexible coupling by either a single‑phase or three‑phase (four pole) motor.
Edwards E2M 18 Dual Stage Rotary Vane Pump Features:
– The pump is designed for reliable, long‑term operation.
– Thermal overload device prevents overheating (single phase only).
– The drive is provided through a flexible coupling by a single‑phase or three‑phase (four pole) motor.
– The motors are totally enclosed and are cooled by the motor cooling fan.
– Full height O ring sealed oil sight glass for easy checking of oil level and condition.
– Large sight glass and operating oil range.
– IE3 energy efficient 3 phase motor used with E2M28.- E2M 18 and 28 series
Edwards E2M18 Dual Stage Rotary Vane Pump, Three Phase, 200-230/380-415 V, 50 Hz or 200-230/460 V, 60 Hz, A36310940
The Edwards E2M18 Rotary Vane Pump is a vacuum pump that has a pressurized oil system that lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior (suckback) after the pump stops. The pumping chambers are air-tight, so this arrangement prevents oil suckback unless the gas ballast valve is open.
You can inspect the level and condition of oil in the oil box reservoir through the oil sight-glass. An oil filler-plug is fitted to the top of the oil box. The pump has an oil drain-plug to allow either gravity oil drain or pressure oil drain.
The EM Vacuum Pump Series range of oil‑sealed rotary pumps – renowned for their high ultimate vacuum, rapid pumping speed, quiet operation and ability to handle vapour – have become the industry standard for laboratory and light industrial applications. The pump is a freestanding unit with the drive provided through a flexible coupling by either a single‑phase or three‑phase (four pole) motor.
Edwards E2M 18 Dual Stage Rotary Vane Pump Features:
– The pump is designed for reliable, long‑term operation.
– Thermal overload device prevents overheating (single phase only).
– The drive is provided through a flexible coupling by a single‑phase or three‑phase (four pole) motor.
– The motors are totally enclosed and are cooled by the motor cooling fan.
– Full height O ring sealed oil sight glass for easy checking of oil level and condition.
– Large sight glass and operating oil range.
– IE3 energy efficient 3 phase motor used with E2M28. - E2M 18 and 28 series
Edwards E2M28 Dual Stage Rotary Vane Pump, Single Phase, 115/200-230 V, 50/60 Hz, A37317984
The E2M28 Rotary Vane Pump is a two-stage, direct drive, sliding vane pump. The pump is oil-sealed and designed for reliable, long-term operation in both laboratory and industrial environments. The pump is a free-standing unit. The drive is provided through a flexible coupling by a single-phase or three-phase (four pole) motor.
The motors are totally enclosed and are cooled by the motor-cooling fan which directs air along the motor fins.
The single-phase motors have a thermal overload device. When the motor is too hot, the thermal overload device switches off the pump. The thermal overload device has an automatic reset; when the motor cools down, the device resets and the motor will restart. The single phase motors have an on/off switch.
An oil pressure system lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior (suckback) after the pump stops. The pumping chambers are air-tight, so this arrangement prevents air suckback unless the gas-ballast valve is open.
You can inspect the level and condition of oil in the oil box reservoir through the oil sight-glass. An oil filler-plug is fitted to the top of the oil box. The pump has an oil drain-plug to allow gravity oil drain.
The pump has an inlet-port, outlet nozzle and gas-ballast control. The pump is mounted on an aluminum alloy baseplate on rubber pads.
Edwards E2M28 Rotary Vane Vacuum Pump Features:
– The pump is designed for reliable, long‑term operation.
– Thermal overload device prevents overheating (single phase only).
– The drive is provided through a flexible coupling by a single‑phase or three‑phase (four pole) motor.
– The motors are totally enclosed and are cooled by the motor cooling fan.
– Full height O ring sealed oil sight glass for easy checking of oil level and condition.
– Large sight glass and operating oil range.
– IE3 energy efficient 3 phase motor used with E2M28. - E2M 18 and 28 series
Edwards E2M28 Rotary Vane Vacuum Pump, Hydrocarbon Oil, Dual Stage, 200-220/380-415 V, Three Phase, 50Hz, A37310940
The E2M28 Rotary Vane Pump is a two-stage, direct drive, sliding vane pump. The pump is oil-sealed and designed for reliable, long-term operation in both laboratory and industrial environments. The pump is a free-standing unit. The drive is provided through a flexible coupling by a single-phase or three-phase (four pole) motor.
The motors are totally enclosed and are cooled by the motor-cooling fan which directs air along the motor fins.
The single-phase motors have a thermal overload device. When the motor is too hot, the thermal overload device switches off the pump. The thermal overload device has an automatic reset; when the motor cools down, the device resets and the motor will restart. The single phase motors have an on/off switch.
An oil pressure system lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior (suckback) after the pump stops. The pumping chambers are air-tight, so this arrangement prevents air suckback unless the gas-ballast valve is open.
You can inspect the level and condition of oil in the oil box reservoir through the oil sight-glass. An oil filler-plug is fitted to the top of the oil box. The pump has an oil drain-plug to allow gravity oil drain.
The pump has an inlet-port, outlet nozzle and gas-ballast control. The pump is mounted on an aluminum alloy baseplate on rubber pads.
Edwards E2M28 Rotary Vane Vacuum Pump Features:
– The pump is designed for reliable, long‑term operation.
– Thermal overload device prevents overheating (single phase only).
– The drive is provided through a flexible coupling by a single‑phase or three‑phase (four pole) motor.
– The motors are totally enclosed and are cooled by the motor cooling fan.
– Full height O ring sealed oil sight glass for easy checking of oil level and condition.
– Large sight glass and operating oil range.
– IE3 energy efficient 3 phase motor used with E2M28.
- E2M 18 and 28 series
Edwards E2M18 Dual Stage Rotary Vane Pump, Single Phase, 115/200-230 V, 50/60 Hz, A36317984
The Edwards E2M18 Rotary Vane Pump is a vacuum pump that has a pressurized oil system that lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior (suckback) after the pump stops. The pumping chambers are air-tight, so this arrangement prevents oil suckback unless the gas ballast valve is open.
You can inspect the level and condition of oil in the oil box reservoir through the oil sight-glass. An oil filler-plug is fitted to the top of the oil box. The pump has an oil drain-plug to allow either gravity oil drain or pressure oil drain.
The EM Vacuum Pump Series range of oil‑sealed rotary pumps – renowned for their high ultimate vacuum, rapid pumping speed, quiet operation and ability to handle vapour – have become the industry standard for laboratory and light industrial applications. The pump is a freestanding unit with the drive provided through a flexible coupling by either a single‑phase or three‑phase (four pole) motor.
Edwards E2M 18 Dual Stage Rotary Vane Pump Features:
– The pump is designed for reliable, long‑term operation.
– Thermal overload device prevents overheating (single phase only).
– The drive is provided through a flexible coupling by a single‑phase or three‑phase (four pole) motor.
– The motors are totally enclosed and are cooled by the motor cooling fan.
– Full height O ring sealed oil sight glass for easy checking of oil level and condition.
– Large sight glass and operating oil range.
– IE3 energy efficient 3 phase motor used with E2M28.SKU: A36317984Login to see price! Add to cart - E2M 18 and 28 series
Edwards E2M18 Dual Stage Rotary Vane Pump, Three Phase, 200-230/380-415 V, 50 Hz or 200-230/460 V, 60 Hz, A36310940
The Edwards E2M18 Rotary Vane Pump is a vacuum pump that has a pressurized oil system that lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior (suckback) after the pump stops. The pumping chambers are air-tight, so this arrangement prevents oil suckback unless the gas ballast valve is open.
You can inspect the level and condition of oil in the oil box reservoir through the oil sight-glass. An oil filler-plug is fitted to the top of the oil box. The pump has an oil drain-plug to allow either gravity oil drain or pressure oil drain.
The EM Vacuum Pump Series range of oil‑sealed rotary pumps – renowned for their high ultimate vacuum, rapid pumping speed, quiet operation and ability to handle vapour – have become the industry standard for laboratory and light industrial applications. The pump is a freestanding unit with the drive provided through a flexible coupling by either a single‑phase or three‑phase (four pole) motor.
Edwards E2M 18 Dual Stage Rotary Vane Pump Features:
– The pump is designed for reliable, long‑term operation.
– Thermal overload device prevents overheating (single phase only).
– The drive is provided through a flexible coupling by a single‑phase or three‑phase (four pole) motor.
– The motors are totally enclosed and are cooled by the motor cooling fan.
– Full height O ring sealed oil sight glass for easy checking of oil level and condition.
– Large sight glass and operating oil range.
– IE3 energy efficient 3 phase motor used with E2M28.SKU: A36310940Login to see price! Add to cart - E2M 18 and 28 series
Edwards E2M28 Dual Stage Rotary Vane Pump, Single Phase, 115/200-230 V, 50/60 Hz, A37317984
The E2M28 Rotary Vane Pump is a two-stage, direct drive, sliding vane pump. The pump is oil-sealed and designed for reliable, long-term operation in both laboratory and industrial environments. The pump is a free-standing unit. The drive is provided through a flexible coupling by a single-phase or three-phase (four pole) motor.
The motors are totally enclosed and are cooled by the motor-cooling fan which directs air along the motor fins.
The single-phase motors have a thermal overload device. When the motor is too hot, the thermal overload device switches off the pump. The thermal overload device has an automatic reset; when the motor cools down, the device resets and the motor will restart. The single phase motors have an on/off switch.
An oil pressure system lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior (suckback) after the pump stops. The pumping chambers are air-tight, so this arrangement prevents air suckback unless the gas-ballast valve is open.
You can inspect the level and condition of oil in the oil box reservoir through the oil sight-glass. An oil filler-plug is fitted to the top of the oil box. The pump has an oil drain-plug to allow gravity oil drain.
The pump has an inlet-port, outlet nozzle and gas-ballast control. The pump is mounted on an aluminum alloy baseplate on rubber pads.
Edwards E2M28 Rotary Vane Vacuum Pump Features:
– The pump is designed for reliable, long‑term operation.
– Thermal overload device prevents overheating (single phase only).
– The drive is provided through a flexible coupling by a single‑phase or three‑phase (four pole) motor.
– The motors are totally enclosed and are cooled by the motor cooling fan.
– Full height O ring sealed oil sight glass for easy checking of oil level and condition.
– Large sight glass and operating oil range.
– IE3 energy efficient 3 phase motor used with E2M28.SKU: A37317984Login to see price! Add to cart - E2M 18 and 28 series
Edwards E2M28 Rotary Vane Vacuum Pump, Hydrocarbon Oil, Dual Stage, 200-220/380-415 V, Three Phase, 50Hz, A37310940
The E2M28 Rotary Vane Pump is a two-stage, direct drive, sliding vane pump. The pump is oil-sealed and designed for reliable, long-term operation in both laboratory and industrial environments. The pump is a free-standing unit. The drive is provided through a flexible coupling by a single-phase or three-phase (four pole) motor.
The motors are totally enclosed and are cooled by the motor-cooling fan which directs air along the motor fins.
The single-phase motors have a thermal overload device. When the motor is too hot, the thermal overload device switches off the pump. The thermal overload device has an automatic reset; when the motor cools down, the device resets and the motor will restart. The single phase motors have an on/off switch.
An oil pressure system lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior (suckback) after the pump stops. The pumping chambers are air-tight, so this arrangement prevents air suckback unless the gas-ballast valve is open.
You can inspect the level and condition of oil in the oil box reservoir through the oil sight-glass. An oil filler-plug is fitted to the top of the oil box. The pump has an oil drain-plug to allow gravity oil drain.
The pump has an inlet-port, outlet nozzle and gas-ballast control. The pump is mounted on an aluminum alloy baseplate on rubber pads.
Edwards E2M28 Rotary Vane Vacuum Pump Features:
– The pump is designed for reliable, long‑term operation.
– Thermal overload device prevents overheating (single phase only).
– The drive is provided through a flexible coupling by a single‑phase or three‑phase (four pole) motor.
– The motors are totally enclosed and are cooled by the motor cooling fan.
– Full height O ring sealed oil sight glass for easy checking of oil level and condition.
– Large sight glass and operating oil range.
– IE3 energy efficient 3 phase motor used with E2M28.SKU: A37310940Login to see price! Add to cart
- E2M 18 and 28 series
Edwards E2M18 Dual Stage Rotary Vane Pump, Single Phase, 115/200-230 V, 50/60 Hz, A36317984
The Edwards E2M18 Rotary Vane Pump is a vacuum pump that has a pressurized oil system that lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior (suckback) after the pump stops. The pumping chambers are air-tight, so this arrangement prevents oil suckback unless the gas ballast valve is open.
You can inspect the level and condition of oil in the oil box reservoir through the oil sight-glass. An oil filler-plug is fitted to the top of the oil box. The pump has an oil drain-plug to allow either gravity oil drain or pressure oil drain.
The EM Vacuum Pump Series range of oil‑sealed rotary pumps – renowned for their high ultimate vacuum, rapid pumping speed, quiet operation and ability to handle vapour – have become the industry standard for laboratory and light industrial applications. The pump is a freestanding unit with the drive provided through a flexible coupling by either a single‑phase or three‑phase (four pole) motor.
Edwards E2M 18 Dual Stage Rotary Vane Pump Features:
– The pump is designed for reliable, long‑term operation.
– Thermal overload device prevents overheating (single phase only).
– The drive is provided through a flexible coupling by a single‑phase or three‑phase (four pole) motor.
– The motors are totally enclosed and are cooled by the motor cooling fan.
– Full height O ring sealed oil sight glass for easy checking of oil level and condition.
– Large sight glass and operating oil range.
– IE3 energy efficient 3 phase motor used with E2M28.Login to see price! Add to cart - E2M 18 and 28 series
Edwards E2M18 Dual Stage Rotary Vane Pump, Three Phase, 200-230/380-415 V, 50 Hz or 200-230/460 V, 60 Hz, A36310940
The Edwards E2M18 Rotary Vane Pump is a vacuum pump that has a pressurized oil system that lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior (suckback) after the pump stops. The pumping chambers are air-tight, so this arrangement prevents oil suckback unless the gas ballast valve is open.
You can inspect the level and condition of oil in the oil box reservoir through the oil sight-glass. An oil filler-plug is fitted to the top of the oil box. The pump has an oil drain-plug to allow either gravity oil drain or pressure oil drain.
The EM Vacuum Pump Series range of oil‑sealed rotary pumps – renowned for their high ultimate vacuum, rapid pumping speed, quiet operation and ability to handle vapour – have become the industry standard for laboratory and light industrial applications. The pump is a freestanding unit with the drive provided through a flexible coupling by either a single‑phase or three‑phase (four pole) motor.
Edwards E2M 18 Dual Stage Rotary Vane Pump Features:
– The pump is designed for reliable, long‑term operation.
– Thermal overload device prevents overheating (single phase only).
– The drive is provided through a flexible coupling by a single‑phase or three‑phase (four pole) motor.
– The motors are totally enclosed and are cooled by the motor cooling fan.
– Full height O ring sealed oil sight glass for easy checking of oil level and condition.
– Large sight glass and operating oil range.
– IE3 energy efficient 3 phase motor used with E2M28.Login to see price! Add to cart - E2M 18 and 28 series
Edwards E2M28 Dual Stage Rotary Vane Pump, Single Phase, 115/200-230 V, 50/60 Hz, A37317984
The E2M28 Rotary Vane Pump is a two-stage, direct drive, sliding vane pump. The pump is oil-sealed and designed for reliable, long-term operation in both laboratory and industrial environments. The pump is a free-standing unit. The drive is provided through a flexible coupling by a single-phase or three-phase (four pole) motor.
The motors are totally enclosed and are cooled by the motor-cooling fan which directs air along the motor fins.
The single-phase motors have a thermal overload device. When the motor is too hot, the thermal overload device switches off the pump. The thermal overload device has an automatic reset; when the motor cools down, the device resets and the motor will restart. The single phase motors have an on/off switch.
An oil pressure system lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior (suckback) after the pump stops. The pumping chambers are air-tight, so this arrangement prevents air suckback unless the gas-ballast valve is open.
You can inspect the level and condition of oil in the oil box reservoir through the oil sight-glass. An oil filler-plug is fitted to the top of the oil box. The pump has an oil drain-plug to allow gravity oil drain.
The pump has an inlet-port, outlet nozzle and gas-ballast control. The pump is mounted on an aluminum alloy baseplate on rubber pads.
Edwards E2M28 Rotary Vane Vacuum Pump Features:
– The pump is designed for reliable, long‑term operation.
– Thermal overload device prevents overheating (single phase only).
– The drive is provided through a flexible coupling by a single‑phase or three‑phase (four pole) motor.
– The motors are totally enclosed and are cooled by the motor cooling fan.
– Full height O ring sealed oil sight glass for easy checking of oil level and condition.
– Large sight glass and operating oil range.
– IE3 energy efficient 3 phase motor used with E2M28.Login to see price! Add to cart - E2M 18 and 28 series
Edwards E2M28 Rotary Vane Vacuum Pump, Hydrocarbon Oil, Dual Stage, 200-220/380-415 V, Three Phase, 50Hz, A37310940
The E2M28 Rotary Vane Pump is a two-stage, direct drive, sliding vane pump. The pump is oil-sealed and designed for reliable, long-term operation in both laboratory and industrial environments. The pump is a free-standing unit. The drive is provided through a flexible coupling by a single-phase or three-phase (four pole) motor.
The motors are totally enclosed and are cooled by the motor-cooling fan which directs air along the motor fins.
The single-phase motors have a thermal overload device. When the motor is too hot, the thermal overload device switches off the pump. The thermal overload device has an automatic reset; when the motor cools down, the device resets and the motor will restart. The single phase motors have an on/off switch.
An oil pressure system lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior (suckback) after the pump stops. The pumping chambers are air-tight, so this arrangement prevents air suckback unless the gas-ballast valve is open.
You can inspect the level and condition of oil in the oil box reservoir through the oil sight-glass. An oil filler-plug is fitted to the top of the oil box. The pump has an oil drain-plug to allow gravity oil drain.
The pump has an inlet-port, outlet nozzle and gas-ballast control. The pump is mounted on an aluminum alloy baseplate on rubber pads.
Edwards E2M28 Rotary Vane Vacuum Pump Features:
– The pump is designed for reliable, long‑term operation.
– Thermal overload device prevents overheating (single phase only).
– The drive is provided through a flexible coupling by a single‑phase or three‑phase (four pole) motor.
– The motors are totally enclosed and are cooled by the motor cooling fan.
– Full height O ring sealed oil sight glass for easy checking of oil level and condition.
– Large sight glass and operating oil range.
– IE3 energy efficient 3 phase motor used with E2M28.Login to see price! Add to cart